Runtime Error 9
4 posters
Page 1 of 1
Runtime Error 9
When using Tune Vnav and airac cycle 0909 I get a Runtime Error when clicking the Set apt config. Any idea what might be wrong?
peterhag- Posts : 1
Join date : 2009-09-06
Runtime error 9
Hi Peter,
I found the problem. The AIRAC is bad formatted, I have informed Navigraph about the issue.
Here is the link to their forum with the posted issue:
http://forum.navigraph.com/forum/default.aspx?g=posts&m=5580ᗌ
An AIRAC revision will be made to be downloaded from their site.
Thanks for the info.
Regards,
Valerian
I found the problem. The AIRAC is bad formatted, I have informed Navigraph about the issue.
Here is the link to their forum with the posted issue:
http://forum.navigraph.com/forum/default.aspx?g=posts&m=5580ᗌ
An AIRAC revision will be made to be downloaded from their site.
Thanks for the info.
Regards,
Valerian
Hope its ok to report another Error 9 with AIRAC 1007
To repro, use B738 aircraft and choose KELP airport, click "Get APT"
This has been happening for quite a few AIRAC versions but the one I'm currently using is 1007.
This has been happening for quite a few AIRAC versions but the one I'm currently using is 1007.
scottgr- Posts : 1
Join date : 2010-07-08
Hope its ok to report another Error 9 with AIRAC 1007
Thanks for posting this new error.
I will search the cause and I will inform the Navigraph guys to make the proper adjustments.
The issue here is that, initially they had the data base for TuneVNAV structured in a way that TuneVNAV could get the info form it as needed.
For no reason they have made some minor changes into their structure so TuneVNAV can't get the data as before. Therefore it crashes...
I have identified most of the issues and asked them to fix them. Some were fixed but it seems that some... not.
I'll let you know ASAP.
Cheers,
Valerian
I will search the cause and I will inform the Navigraph guys to make the proper adjustments.
The issue here is that, initially they had the data base for TuneVNAV structured in a way that TuneVNAV could get the info form it as needed.
For no reason they have made some minor changes into their structure so TuneVNAV can't get the data as before. Therefore it crashes...
I have identified most of the issues and asked them to fix them. Some were fixed but it seems that some... not.
I'll let you know ASAP.
Cheers,
Valerian
Runtime error too
Hi! when I type EGPB (sumburgh) and hit the get airport button, I get "runtime error 9 subscript out of range". Another airac problem? I'm using airac 1009.
Cheers
Dan
Cheers
Dan
dan- Posts : 2
Join date : 2010-09-24
AIRAC FIX DIY
This error is caused by an AIRAC issue.
Here is how to fix it, and any other that may arrise wich crash TuneVNAV while loading an APT.
Do the following steps:
1.Go to TuneVNAV Pro3 SIDSTARS folder:
On 32bits OS:
C:\Program Files\TuneVNAV Pro3\FMS_DATA\SIDSTARS
On 64bits OS:
C:\Program Files (x86)\TuneVNAV Pro3\FMS_DATA\SIDSTARS
2. Look for the faulty APT ICAO name (ie. EGPB). It is a txt file (EGPB.txt)
3. Double click on it to open it with notepad
4. Look for the following lines:
SID
ENDSIDS
5. Add bellow these lines the following lines that are missing but they should be:
STARS
ENDSTARS
The final result should look like this:
SID
ENDSIDS
STARS
ENDSTARS
(APPROACHES is the line that follows)
IMPORTANT : Make sure you have a empty new line between each group of lines.
6. Save
That is all. Now you can load your APT.
Regards,
Valerian E Partenie
TuneVANV Pro3 author
Here is how to fix it, and any other that may arrise wich crash TuneVNAV while loading an APT.
Do the following steps:
1.Go to TuneVNAV Pro3 SIDSTARS folder:
On 32bits OS:
C:\Program Files\TuneVNAV Pro3\FMS_DATA\SIDSTARS
On 64bits OS:
C:\Program Files (x86)\TuneVNAV Pro3\FMS_DATA\SIDSTARS
2. Look for the faulty APT ICAO name (ie. EGPB). It is a txt file (EGPB.txt)
3. Double click on it to open it with notepad
4. Look for the following lines:
SID
ENDSIDS
5. Add bellow these lines the following lines that are missing but they should be:
STARS
ENDSTARS
The final result should look like this:
SID
ENDSIDS
STARS
ENDSTARS
(APPROACHES is the line that follows)
IMPORTANT : Make sure you have a empty new line between each group of lines.
6. Save
That is all. Now you can load your APT.
Regards,
Valerian E Partenie
TuneVANV Pro3 author
All Ok
That did the trick!
Thanks for your quick support. Love using your program!
regards,
Dan
Thanks for your quick support. Love using your program!
regards,
Dan
dan- Posts : 2
Join date : 2010-09-24
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|